Hi I looked at the Mod Directory for Flipfury mods and the one you guys have is a lock removal, seal upgrade and dead space mod. But I wanted to know if someone could send me specific instructions or a video on how to take out the Air Restrictors on a Nerf Flipfury.
Thanks, NB16
Hello all.
I have recently ordered some Tamiya Torque tuned Motors, and I was reading up on them and found out that they require 3v and require 3-6 amps each/
I was wondering if I'm using AAs, is wiring up two AAs in parallel enough amperage for the motors?
Hi All,
I'm having real trouble getting the blue diamond cut worker flywheels onto a set of Extreme XP Pro 180s. I've tried pushing them on by hand but ended up pushing the motor shaft and brushes out the back of the motor housing, repaired that. So then I tried hot water on the rubber inserts to soften them but still no luck. I just wondered if anyone had any ideas, I've not had this problem before but these are the first diamond cut flywheels I've used and their going into a cantilevered cage.
My only other idea is to try and use a g clamp and wined it down very slowly to push them on but should I really be needing to apply that much force?
... Sorry about the washed out photos. Those are gross looking.
My current WIP: overhauling a Triple strike. My nerfing group allows shields which encourages a broader range of ammo types (rockets break shields) so I've wanted an all in one blaster that can handle long range, short range and rockets, all available on demand on separate triggers. After much searching, I've settled on the tripple strike. The tanks are beastly, out performing both the big salvo and panther tanks I had in my parts bin.
Work done thus far:
*Replaced the stock pump with a 16" bicycle frame pump. (Fills every thing in about 5-7 pumps)
*Scrapped the stock trigger manifold.
scrapped a tank, integrated a SMDTG. Had to chop all 4 hoses and re coupler them to pass them through the shell, but I can stage 3 independent shots ergonomically.
*Routed the 2 remaining TS tanks to blast buttons. (One behind the shaved down trigger (that will be the top primary tank), the other is zip tied on the right side, just above the trigger (that right tank will fire a rocket)
*Re-plumbed every thing. Soooo many quick connect fittings were used in the process. Each tank system has it's own check valve (the couplers with the pink ends) so they can vent/fire without firing the other systems as well. The single pump automatically routes air any empty tank systems. Surprisingly, the thing actually holds air!
Work remaining:
*Design a mag fed breech for the top tank. I could use a hopper, but my group favors full length darts. I'm hoping to design a breech that springs open after the tank fires (via a mechanical latch), and rig the pump to close the breech on the first pump stroke. That way, loading the next dart would be integrated with re pumping the tank instead of reloading as a separate action.
*Stabilize the tanks. They have a little bit of wobble after gutting it.
*design an enclosure to hide the rear plumbing.
Once it's all done, theirs a small chance that I might actually feel motivated to paint the shell. I'm usually not much for aesthetics, but that chrome pump is dang gorgeous.
Does anyone know what kind of PSI the Battlemax bladder puts out? By banding an RF20 bladder with two layers of bike inner tube, I have only been able to get it up to about 50 PSI, and I need more.
I recently took apart a old DVD player and found out that the on/off switch is similar to a switch used in a top shelf mod I plan on putting my switch into my modded rayven but I am not going to do that until I know if it can handle a 3S LiPo and how to install it into my rayven here is a picture of the switch the switch says 250 V
Ahoi
For a while now, I was thinking about a worthy mod for a long strike. They are getting rarer, so you can't just smash on paint and done.
Check it out, let me know what you think (and if there is a way to embed the video, let me know):
I have both but I want to mod them but I don't know how to rewire. but I'm going get new flywheels and I need to know how to get them out. please post picture if you can or do simple instructions
For everyone who's asked how I do it - here you go:
Technically, it's not about Nerf blasters - although there is one in there - so you'll just have to use your imagination.
Hi All,
I'm looking for a wiring diagram for a Stryfe with 2 switches running a XSW auto kit. Not a link to MBT video on Youtube, I've seen that.
If anyone has one or could point me to a link to one, that would be great.
many thanks
Dan
So I've been looking around on Ebay and I've noticed a lot of listings that say something like "modified nerf blaster" or "custom painted nerf gun" and so on. They also tend to be low-tier blasters too, like retaliators/recons and nitefinders/firestrikes, so i assume these listings are marketed towards cos-players or non nerfers. They tend to be much more costly than their stock counterparts, obviously. Anyone on NH have any experience selling blasters like this? I assume the best way to go about this would be to focus solely on cosmetics, like doing little or no modding to the blaster other than painting it, and using a cheap blaster to maximize profit.
could selling a few purpose-built blasters like this be worthwhile or a waste of time?
Hey I know there is a Hammershot mod on here to remove the AR's but I here it is a bad unnecessary mod. So I already have a Hammershot with a 7kg spring removed barrel posts and a removed AR, I did the AR removal before I found out about it's uselessness. But I wanna know what is the best performance upgrade I can do on the Hammershot without breaking it or spending 100 bucks. I heard people say to just use pvc pipe or a 8 kg spring but I don't know which is better or if there is something better. But take into consideration that I suck at modding and I am A noob.
Thanks NerfBeginner16
Hi I am a noob I have an orange Elite XD Alpha Trooper. Elite Alpha Troopers are really expensive now. I am a noob and I am looking for a performance mod that is easy and won't break my gun. The Alpha Trooper has poor performance so I want to upgrade it to make it better. I know I can get a Retaliator that is cheaper and has better stock performance but I like that the alpha trooper has the pump action for easy fast fire rate unlike the Retaliator. So please tell me the BEST easy performance mod that won't break my gun. Thanks
Hi,
I'm looking to buy an extended pushrod that will work with the XSW auto kit, so that I can use Stefan darts in a Stryfe?
Does anyone know of a company selling one?
Cheers
