This is my Gutenberged Crossbow project, "The Morrigan", as she is right now.
Test fitting results: Plunger Tube spacers need to be scaled up, spring rest slot needs to be expanded, ridge under plunger rod needs to be ground down, and catch needs sanding.
Additional work: Expanded spacers, designed plunger head prototype, printed plunger head pieces, trigger, and spacers in transparent green.
Next: Pick up print, acquire the rubber piece for the skirt seal.
The STLs I'm using for this iteration. (I might add some in later iterations.)
Catch02.stl 235.82KB
0 downloads
Trigger02.stl 255.45KB
0 downloads
Priming Handle.stl 30.36KB
0 downloads
Spring Rest v2.stl 1.45KB
0 downloads
Skirt Seal Outer V1.stl 33.97KB
0 downloads
Skirt Seal Inner V2.stl 35.92KB
0 downloads
Plunger Tube Spacer v3.stl 20.2KB
0 downloads
File credits:
Plunger head pieces, spring rest, and plunger tube spacers are reverse engineered from pictures of ModMan internals.
Catch, trigger, and plunger rod are modified from Captain Slug's scans of the Crossbow.